Comparison of levitation force relative to thickness of disk shaped YBa2Cu3O7-x prepared by MPMG and FQMG processes


Kutuk S., BOLAT S., Basoglu M., ÖZTÜRK K.

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.488, sa.1, ss.425-429, 2009 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 488 Sayı: 1
  • Basım Tarihi: 2009
  • Doi Numarası: 10.1016/j.jallcom.2009.08.149
  • Dergi Adı: JOURNAL OF ALLOYS AND COMPOUNDS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.425-429
  • Anahtar Kelimeler: Y123, Melt process, Levitation force, Volume fraction, MELT, SUPERCONDUCTORS, GROWTH, YBCO, JC, GEOMETRY
  • Recep Tayyip Erdoğan Üniversitesi Adresli: Hayır

Özet

The precursor YBCO in the stoichiometric ratio of 1:23 were fabricated using the melt-powder-melt-growth (MPMG) technique, and flame-quench-melt-growth (FQMG) technique. The superconducting regions were determined by calculating the levitation force per unit volume as a function of samples' thickness. Our findings indicate that superconductivity forming ratio is sensitive to the preparation techniques and it grows on the surfaces of the samples prepared by FQMG process while it grows in the middle of the samples fabricated by MPMG technique. It was determined that the MPMG process produces more the superconductivity forming ratio than the FQMG method, which is due to platinum impurities. Our results were also checked by polarized optical microscope and XRD pattern. (C) 2009 Elsevier B.V. All rights reserved.