Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Comparative investigation of different types of expanding micro-pin-fin heat sinks at low mass flux

Markal B., Kul B., AYDIN O.
International Communications in Heat and Mass Transfer , cilt.148, 2023 (SCI-Expanded) identifier

Effect of a new type staggered pin fin configuration on flow boiling characteristics of micro-heat sinks

Markal B., Kul B.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.45, sa.10, 2023 (SCI-Expanded) identifier

Influence of downstream cross-sectional area ratio on flow boiling characteristics of expanding micro pin fin heat sinks

Markal B., Kul B.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.143, 2023 (SCI-Expanded) identifier identifier

Experimental investigation and a new predictive tool for thermal performance of pulsating heat pipes

Markal B., Varol R.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.45, sa.1, 2023 (SCI-Expanded) identifier identifier

Effect of gradually expanding flow passages on flow boiling of micro pin fin heat sinks

Markal B., Kul B., Avcı M., Varol R.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.197, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Combined influence of artificial nucleation site and expanding cross section on flow boiling performance of micro pin fins

MARKAL B., Kul B.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.135, 2022 (SCI-Expanded) identifier identifier

Effect of double cross sectional ratio on performance characteristics of pulsating heat pipes

Markal B., Candan Candere A., Avcı M., Aydın O.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.127, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Investigation of the effects of miscible and immiscible binary fluids on thermal performance of pulsating heat pipes

Markal B., Varol R.
HEAT AND MASS TRANSFER , cilt.57, sa.9, ss.1527-1542, 2021 (SCI-Expanded) identifier identifier

Investigation of flat plate type pulsating heat pipes via flow visualization-assisted experiments: Effect of cross sectional ratio

Markal B., Candere A., Avci M., Aydın O.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.125, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

The combined effects of filling ratio and inclination angle on thermal performance of a closed loop pulsating heat pipe

Markal B., Aksoy K.
HEAT AND MASS TRANSFER , cilt.57, sa.5, ss.751-763, 2021 (SCI-Expanded) identifier identifier

Experimental investigation and force analysis of flat-plate type pulsating heat pipes having ternary mixtures

Markal B., Varol R.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.121, 2021 (SCI-Expanded) identifier identifier

Conical coaxial impinging air jets: angle effect on the heat transfer performance

Markal B., Avci M., Aydın O.
HEAT AND MASS TRANSFER , cilt.56, sa.12, ss.3135-3146, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Thermal investigation and flow pattern analysis of a closed-loop pulsating heat pipe with binary mixtures

Markal B., Varol R.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.42, 2020 (SCI-Expanded) identifier identifier

Prediction of Two-Phase Heat Transfer Coefficient of Flow Boiling in Minichannels

Markal B., Candan A., Aydın O., Avci M.
HEAT TRANSFER ENGINEERING , cilt.41, sa.1, ss.17-35, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Flow boiling characteristics in a novel minichannel with a step on each corner

Markal B., Candan A., AYDIN O.
EXPERIMENTAL HEAT TRANSFER , cilt.33, sa.1, ss.1-17, 2020 (SCI-Expanded) identifier identifier

The effect of Total flowrate on the cooling performance of swirling coaxial impinging jets

Markal B.
HEAT AND MASS TRANSFER , cilt.55, sa.11, ss.3275-3288, 2019 (SCI-Expanded) identifier identifier

Effect of hydraulic diameter on flow boiling in rectangular microchannels

Markal B., AYDIN O., Avci M.
HEAT AND MASS TRANSFER , cilt.55, sa.4, ss.1033-1044, 2019 (SCI-Expanded) identifier identifier

Prediction of Pressure Drop for Flow Boiling in Rectangular Multi-Microchannel Heat Sinks

Markal B., AYDIN O., Avci M.
HEAT TRANSFER ENGINEERING , cilt.40, ss.26-38, 2019 (SCI-Expanded) identifier identifier

Experimental investigation of flow boiling in single minichannels with low mass velocities

Markal B., Candan A., AYDIN O., Avci M.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.98, ss.22-30, 2018 (SCI-Expanded) identifier identifier

Experimental investigation of heat transfer characteristics and wall pressure distribution of swirling coaxial confined impinging air jets

Markal B.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.124, ss.517-532, 2018 (SCI-Expanded) identifier identifier

Experimental investigation of coaxial impinging air jets

Markal B., AYDIN O.
APPLIED THERMAL ENGINEERING , cilt.141, ss.1120-1130, 2018 (SCI-Expanded) identifier identifier

Çarpan Eş Eksenli Bir Hava Jetinde Debi Oranının Akış Karakteristikleri Üzerine Etkisinin Deneysel Olarak İncelenmesi

MARKAL B.
Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.8, sa.2, ss.239-248, 2018 (SCI-Expanded)

Saturated flow boiling characteristics in single rectangular minichannels: effect of aspect ratio

Candan A., Markal B., AYDIN O., Avci M.
EXPERIMENTAL HEAT TRANSFER , cilt.31, sa.6, ss.531-551, 2018 (SCI-Expanded) identifier identifier

EXPERIMENTAL STUDY OF SINGLE-PHASE FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS IN RECTANGULAR MICROCHANNELS

Markal B., AYDIN O., Avci M.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.38, sa.1, ss.65-72, 2018 (SCI-Expanded) identifier identifier

Prediction of Heat Transfer Coefficient in Saturated Flow Boiling Heat Transfer in Parallel Rectangular Microchannel Heat Sinks: An Experimental Study

Markal B., AYDIN O., Avci M.
HEAT TRANSFER ENGINEERING , cilt.38, sa.16, ss.1415-1428, 2017 (SCI-Expanded) identifier identifier

An experimental investigation of saturated flow boiling heat transfer and pressure drop in square microchannels

Markal B., AYDIN O., Avci M.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.65, ss.1-11, 2016 (SCI-Expanded) identifier identifier

Effect of aspect ratio on saturated flow boiling in microchannels

Markal B., AYDIN O., Avci M.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.93, ss.130-143, 2016 (SCI-Expanded) identifier identifier

An experimental study on the decaying swirl flow in a tube

AYDIN O., Avci M., Markal B., YAZICI M.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.55, ss.22-28, 2014 (SCI-Expanded) identifier identifier

Using artificial neural network for predicting performance of the Ranque-Hilsch vortex tube

Korkmaz M. E., GÜMÜŞEL L., Markal B.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.35, sa.6, ss.1690-1696, 2012 (SCI-Expanded) identifier identifier

Exergy analysis of a counter-flow Ranque-Hilsch vortex tube having different helical vortex generators

Markal B., AYDIN O., Avci M.
INTERNATIONAL JOURNAL OF EXERGY , cilt.10, sa.2, ss.228-238, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

A new vortex generator geometry for a counter-flow Ranque-Hilsch vortex tube

AYDIN O., Markal B., Avci M.
APPLIED THERMAL ENGINEERING , cilt.30, sa.16, ss.2505-2511, 2010 (SCI-Expanded) identifier identifier

An experimental study on the effect of the valve angle of counter-flow Ranque-Hilsch vortex tubes on thermal energy separation

Markal B., AYDIN O., Avci M.
EXPERIMENTAL THERMAL AND FLUID SCIENCE , cilt.34, sa.7, ss.966-971, 2010 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

MİKRO PİM TİPİ KANATÇIKLI VE MİKRO OYUKLU ISI ALICIDA DOYMUŞ KAYNAMALI AKIŞIN DENEYSEL İNCELENMESİ

Markal B., Kul B.
SELCUK UNIVERSITY JOURNAL OF ENGINEERING, SCIENCE AND TECHNOLOGY , cilt.11, sa.1, ss.103-123, 2023 (Hakemli Dergi) identifier

Düşük Dolum Oranında İkili Karışımlarla Yüklü Üniform Olmayan Atımlı Isı Borusunun Deneysel İncelenmesi

MARKAL B., VAROL R.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.9, sa.4, ss.1086-1100, 2021 (Hakemli Dergi)

Dönmeli Eş-Eksenli Hava Jetinin Isıl Davranışının Yakın Çarpma Mesafeleri için Deneysel Olarak İncelenmesi

MARKAL B.
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , cilt.12, sa.2, ss.443-453, 2020 (Hakemli Dergi)

Dönmeli Eş Eksenli Çarpan Jetlerde Isı Transferinin Deneysel İncelenmesi

MARKAL B., AYDIN O.
Tesisat Mühendisliği , sa.175, ss.39-45, 2020 (Hakemli Dergi)

Kare Kesitli Mikrokanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

MARKAL B., AYDIN O., AVCI M.
Mühendis ve Makina , cilt.60, sa.694, ss.50-66, 2019 (Hakemli Dergi)

Minikanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

CANDAN A., MARKAL B., AYDIN O., AVCI M.
Tesisat Mühendisliği , sa.164, ss.29-38, 2018 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

EFFECT OF INCLINATION ANGLE ON FLOW BOILING IN MICRO-SIZED CHANNELS

MARKAL B., EVCİMEN A.
Fourteen International Conference on Thermal Engineering: Theory and Applications May 25-27, 2023 Yalova , Turkiye, 25 - 27 Mayıs 2023

TRANSIENT BEHAVIOR OF NON-UNIFORM PULSATING HEAT PIPES UNDER DIFFERENT HEAT LOADS

MARKAL B., EVCİMEN A.
International Symposium on Convective Heat and Mass Transfer (CONV-22), İzmir, Türkiye, 09 Haziran 2022, ss.579-587

DOLUM ORANININ ÜNİFORM OLMAYAN KESİTE SAHİP ATIMLI ISI BORUSUNUN ÇALIŞMA PERFORMANSI ÜZERİNDEKİ ETKİSİ

CANDAN CANDERE A., MARKAL B., AVCI M., AYDIN O.
ULIBTK’21 Uluslararası Katılımlı 23. Isı Bilimi ve Tekniği Kongresi, Gaziantep, Türkiye, 08 Eylül 2021, cilt.2, ss.1797-1805

A Promising Cooling Device for Electronics in Vehicles: Pulsating Heat Pipes

MARKAL B., VAROL R.
INTERNATIONAL SYMPOSIUM ON AUTOMOTIVE SCIENCE AND TECHNOLOGY (ISASTECH 2021), Ankara, Türkiye, 08 Eylül 2021, cilt.2, ss.1-8

A REVIEW OF THE EFFECTS OF MICRO FIN GEOMETRY AND ALIGNMENT ON FLOW BOILING CHARACTERISTICS IN MICROCHANNEL HEAT SINKS

MARKAL B., KUL B.
5th International Anatolian Energy Symposium (AES 2021), Trabzon, Türkiye, 24 Mart 2021, ss.92-101

EXPERIMENTAL INVESTIGATION OF THE PULSATING HEAT PIPES HAVING LARGER FLOW SECTIONS IN THE EVAPORATOR REGION

CANDAN CANDERE A., MARKAL B., AYDIN O., AVCI M.
5th International Anatolian Energy Symposium (AES 2021), Trabzon, Türkiye, 24 Mart 2021, ss.630-636

Effect of Filling Ratio on Thermal Performance of a Non-uniform Pulsating Heat Pipe

MARKAL B., VAROL R.
International Conference on Energy, Environment and Storage of Energy (Iceesen 2020), Kayseri, Türkiye, 19 - 21 Kasım 2020, ss.206-213

Effect of Mixing Ratio of Binary Mixtures on Heat Transfer Characteristics of a Pulsating Heat Pipe

MARKAL B., VAROL R.
International 2nd Conference on Sustainable Energy and Energy Calculations (ICSEEC2020), İstanbul, Türkiye, 4 - 05 Eylül 2020, ss.53-62

HEAT TRANSFER BEHAVIOR OF COAXIAL IMPINGING JETS: ANEXPERIMENTAL STUDY

MARKAL B., AYDIN O.
22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019

Konutlarda Yağmur Suyu Potansiyelinden Faydalanma

VAROL R., MARKAL B.
4th INTERNATIONAL ENERGY ENGINEERING CONGRESS 2019 (UEMK 2019), Gaziantep, Türkiye, 24 - 25 Ekim 2019, ss.1109-1117

A FLOW DYNAMIC INVESTIGATION OF JET IMPINGEMENT WITHSWIRLING COAXIAL FORM

MARKAL B.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’19), Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.451-456

The Effect of Jet Impingement on the Performance of a Photovoltaic Module

MARKAL B., VAROL R.
3rd International Symposium on Innovative Approaches in Scientific Studies, Ankara, Türkiye, 19 - 21 Nisan 2019, ss.647-650 Sürdürülebilir Kalkınma

Dönmeli Eş Eksenli Çarpan Jetlerde Isı Transferinin Deneysel İncelenmesi

MARKAL B., AYDIN O.
14. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Türkiye, 17 - 20 Nisan 2019, ss.793-801

Thermal Characteristics of Swirling Coaxial Confined Impinging Air Jets: An Experimental Investigation

MARKAL B.
2nd International Symposium on Innovative Approaches in Scientific Studies, Samsun, Türkiye, 30 Kasım - 02 Aralık 2018, cilt.3, ss.66-71

Flow Characteristics of Swirling Coaxial Impinging Air Jets: An Experimental Investigation

MARKAL B.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.782-795

EXPERIMENTAL INVESTIGATION OF THE EFFECT OF FILLING RATIO AND INCLINATION ANGLE ON THE HEAT PIPE PERFORMANCE

MARKAL B., AKSOY K.
III. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ, Gaziantep, Türkiye, 21 - 22 Haziran 2018, ss.284-291

Effects of Flowrate Ratio and Nozzle-to-plate Distance on the Hydrodynamic Characteristics of Impinging Coaxial Jets

MARKAL B.
7th International Conference on Advanced Technologies (ICAT'18), Antalya, Türkiye, 28 Nisan - 01 Mayıs 2018, ss.832-839

KESİTİ T-ŞEKLİNDE OLAN TEK BİR MİNİ KANALDA DOYMUŞ KAYNAMALI AKIŞ KARAKTERİSTİKLERİNİN DENEYSEL İNCELENMESİ

MARKAL B., CANDAN A., AYDIN O.
4. Uluslararası Katılımlı Anadolu Enerji Sempozyumu (AES 2018), Edirne, Türkiye, 18 - 20 Nisan 2018, ss.561-572

Yenilikçi Soğutma Teknolojileri: Isı Boruları

MARKAL B., AKSOY K.
1st International Symposium on Innovative Approaches in Scientific Studies (ISAS 2018), Antalya, Türkiye, 11 - 13 Nisan 2018, cilt.2, ss.336-342

Flow Boiling Characteristics in a Single Rectangular Microchannel

MARKAL B., CANDAN A., AYDIN O., AVCI M.
8th International Advanced Technologies Symposium (IATS217), 19 - 22 Ekim 2017, ss.2075-2081

Mikro boyutlu dikdörtgensel kanallarda kaynamalı akışın deneysel incelenmesi

MARKAL B., AYDIN O., AVCI M.
VIII. Ulusal Hidrolik Pnömatik Kongresi, Türkiye, 22 - 25 Kasım 2017

MİKRO BOYUTLU DİKDÖRTGENSEL KANALLARDA KAYNAMALI AKIŞIN DENEYSEL İNCELENMESİ

MARKAL B., AYDIN O., AVCI M.
VIII. ULUSAL HİDROLİK PNÖMATİK KONGRESİ, İzmir, Türkiye, 22 - 25 Kasım 2017, ss.491-498

Flow Boiling Characteristics in a Single Rectangular Minichannel

MARKAL B., CANDAN A., AYDIN O., AVCI M.
8th International Advanced Technologies Symposium (IATS’17), Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.2075-2081

KARE KESİTLİ MİNİ BİR KANAL İÇERİSİNDE KAYNAMALI AKIŞIN DENEYSEL İNCELENMESİ

CANDAN A., MARKAL B., AYDIN O., AVCI M.
ULIBTK’17 21. Ulusal Isı Bilimi ve Tekniği Kongresi, Çorum, Türkiye, 13 - 16 Eylül 2017, ss.313-321

Kare kesitli mikrokanallarda doymuş kaynamalı akış karakteristiklerinin deneysel incelenmesi

MARKAL B., AYDIN O., AVCI M.
13. Ulusal Tesisat Mühendisliği Kongresi, Türkiye, 19 - 22 Nisan 2017

Minikanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

CANDAN A., MARKAL B., AYDIN O., AVCI M.
13. Ulusal Tesisat Mühendisliği Kongresi, Türkiye, 19 - 22 Nisan 2017

Kare kesitli mikrokanallarda doymuş kaynamalı akış karakteristiklerinin deneysel incelenmesi

MARKAL B., AYDIN O., AVCI M.
13. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Türkiye, 19 - 22 Nisan 2017, ss.1433-1442

Minikanallarda doymuş kaynamalı akış karakteristiklerinin deneysel incelenmesi

CANDAN A., MARKAL B., AYDIN O., AVCI M.
13. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Türkiye, 19 - 22 Nisan 2017, ss.1483-1494

Kare kesitli mini bir kanal içerisinde kaynamalı akışın deneysel incelenmes

CANDAN A., AVCI M., MARKAL B., AYDIN O.
21. Ulusal Isı Bilimi ve Tekniği Kongresi, Türkiye, 13 - 16 Nisan 2017

Paralel mikro kanallı ısı alıcıda kaynamalı akış karakteristiklerinin deneysel olarak incelenmesi

MARKAL B., AYDIN O., AVCI M.
20. Ulusal Isı Bilimi ve Tekniği Kongresi 2015 (ULIBTK’15), Türkiye, 2 - 05 Eylül 2015

Paralel mikro kanallı ısı alıcıda kaynamalı akış karakteristiklerinin deneysel olarak incelenmesi

MARKAL B., AYDIN O., AVCI M.
ULIBTK’15 20.Isı Bilimi ve Tekniği Kongresi, Balıkesir, Türkiye, 2 - 05 Eylül 2015, ss.85-95

Ortam sıcaklığı ve yalıtımın Ranque-Hilsch vorteks tüpü performansı üzerindeki etkisinin deneysel olarak incelenmesi

MARKAL B., AYDIN O., AVCI M.
ULIBTK'13 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.905-910

Metrikler

Yayın

70

Atıf (WoS)

524

H-İndeks (WoS)

15

Atıf (Scopus)

603

H-İndeks (Scopus)

16

Proje

4

Fikri Mülkiyet

2

Tez Danışmanlığı

3
BM Sürdürülebilir Kalkınma Amaçları